Hi, Srinidhi.
Because TN software generates the packet as the whole Ethernet frame,
NUT must receive the packet on the Ethernet.
Especially, when NUT is the router,
packet forwarding test is also performed.
This packet forwarding test needs to use 2 interfaces.
Then, NUT (router) needs 2 Ethernet interfaces.
Which media are you using for your WAN interface?
If your WAN interface uses Ethernet and PPPoE can be disable,
I think that you can test.
If your WAN interface uses non-Ethernet interface,
you must need to prepare the media converter (if possible).
I didn't try the media converter, but I guess that it can be used.
Anyway, current TAHI tester supports only Ethernet regardless of LAN or WAN.
That is the limitation of the software.
Thanks,
On Mon, 23 Mar 2009 15:09:37 +0530
Srinidhi Gopal <srinidhigopal@gmail.com> wrote:
> Hi,
>
> I have a query on the test setup required for IPv6 Core Logo Phase 2. I
> would like to perform the tests on a Router which has 1 LAN interface and 1
> WAN interface. The below mentioned link suggests that the NUT should have at
> least 2 LAN interfaces. Is that mandatory?
>
> http://en.opensuse.org/Tahi_IPv6_tests_HOWTO
>
> Kindly Clarify
> --
> Regards,
> Srinidhi Gopal
>
--
Yukiyo Akisada <akisada@tahi.org>