Date: Wed, 8 Apr 2009 11:56:59 +0530 From: Srinidhi Gopal <srinidhigopal@gmail.com> Subject: [users:01167] Re: Query on Test v6LC.2.2.5 - IPv6 Core Logo Phase 2 To: Yukiyo Akisada <akisada@tahi.org> Cc: users@tahi.org Message-Id: <3f9723c40904072326rf4a6a90q3e9706820955227d@mail.gmail.com> In-Reply-To: <20090407103947.2ad1bea8.akisada@tahi.org> References: <3f9723c40904022314l47c22a0eo44c432028296b0e4@mail.gmail.com> <20090407103947.2ad1bea8.akisada@tahi.org> X-Mail-Count: 01167Hi, I found the issue. RA advertisement had the following paramters misconfigured: ------------------------------------------------------------------------------------------------------------------------------ ng compare opt_prefix_link0_default.RFlag received:1 = 0 ng compare opt_prefix_link0_default.ValidLifetime received:86400 = 2592000 ng compare opt_prefix_link0_default.PreferredLifetime received:14400 = 604800 ng count Packet_IPv6.ICMPv6_RA != Packet_IPv6.ICMPv6_RA ------------------------------------------------------------------------------------------------------------------------------ Have modified these in the RA and all the tests which were failing with "Couldn't observe RA", are passing now. Thanks, Srinidhi On Tue, Apr 7, 2009 at 7:09 AM, Yukiyo Akisada <akisada@tahi.org> wrote: > Hi, Srinidhi. > > One problem is that "tcpdump_v6lc_2_2_5" captured RA, but "121.html" > didn't. > Usually, v6eval is receiving all packets on the wire. > > Are you using the network switch between TN and NUT? > Using shared hub or crossed ethernet cable is required. > Could you check your physical network topology? > > Thanks, > > > On Fri, 3 Apr 2009 11:44:48 +0530 > Srinidhi Gopal <srinidhigopal@gmail.com> wrote: > > > Hi, > > > > I am running IPv6 Ready Logo Phase 2 on the target board (Router > Box).Test > > v6LC.2.2.5 fails. > > > > During the test execution, I observe that the router is sending RA to > > all-node-multicast address(ff02::1) periodically. But when the host sends > > solicitation msg to all-router-multicast address(ff02::2), router is not > > responding. > > > > But when i do a ping6 from the host to all-router-multicast address, the > > router is responding back with echo reply. So this assures that the > > connectivity is fine. > > > > Have attached the following logs > > > > - tcpdump_v6lc_2_2_5 & tcpdump_ping6. > > > > Kindly help me in resolving this issue. > > > > -- > > Regards, > > Srinidhi Gopal > > > > > -- > Yukiyo Akisada <akisada@tahi.org> >1167_2.html (attatchment)(tag is disabled)