Date: Fri, 29 Jan 2010 15:34:36 +0530 From: rajasekar bonthala <rajasekhar.bonthala@gmail.com> Subject: [users:01488] Self-Test-4-0-5 Installation - help To: users@tahi.org Message-Id: <cddcb65a1001290204k281029b8h4f7e7780520f10b6@mail.gmail.com> X-Mail-Count: 01488Hi All, I am trying to install the Self Test-4-0-5 using the INSTALL.ct. I have the following doubts on few sections of INSTALL . ct 1. In Section 2.1.2, I am pasting down the few lines of section below : ============================================== - two network interfaces used in testing, must be 'up' status. and NUT have two Link Local Address based on EUI64 (MAC address base). and NUT have following two Global Address. Link0 : 3ffe:501:ffff:100: + EUI64 (MAC address base) Link1 : 3ffe:501:ffff:101: + EUI64 (MAC address base) =============================================== Above, it is mentioned that NUT have two link local address and two global address. Does it mean that NUT interfaces has to be configured with the link local address and above global address (OR) Is it a configuration in the nut.def file. 2. Section 2.2.1 - Do we need to remove resolv.conf at the NUT or at the TN ? 3. Section 2.2.3 applies to rc.conf file of NUT or TN ? While running the tests, the tool is prompting us to configure manually at the NUT side like add static route, delete static route etc... Before running the tests, can I know the lists of all requests that will made by the tool to us to configure the NUT manually ? so that I can document the commands in advance and run the tests. Thanks, RajaSekhar1488_2.html (attatchment)(tag is disabled)